Versions Compared

Version Old Version 15 New Version 16
Changes made by

Sebastian Florek-Paszkowski

Sebastian Florek-Paszkowski

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. After unboxing and before installation, connect TITAN to the GCS App via Blu-Link or USB-Link. You can download GCS here: https://www.gatee.eu/gcs


    The GCS Information for Use is here: https://www.gatee.eu/manuals

  2. Check for latest firmware updates.

Tip

Note
Your Android (version 5.0 or higher) device must support OTG technology to run the GATE Control Station App.

Tip

Note 
You need a USB-Link or a Blu-Link to connect your TITAN to the GATE Control Station for Android and Windows/macOS. To connect to the iOS GCS, you must use a Blu-Link.

Tip

Note
If you are using USB-Link, your Android (version 5.0 or higher) device must support OTG technology to run the GATE Control Station App.

Tip

Note
If you are using Blu-Link, Bluetooth 4.0 or higher is required. Now you’re ready to install TITAN in the gearbox.

Installation

Note

Caution
Regardless of your previous experience, follow all safety precautions to prevent any damage to your TITAN.

...

Function

available if preset in GCS

in SEMI or BURST mode preset in GCS in SEMI physical position only

Pre-cocking

Profiles (EXPERT only)

Programming via trigger

To enter the function: hold the trigger 

and switch the Fire Selector within 2 s

and switch the Fire Selector within 2–7 s

for > 7 s 

Available options

Option

Low frequency vibration

Option

High frequency vibration

check the PROGRAMMING VIA TRIGGER CARD included or https://gatee.eu/technical-support/manuals

Off

1

Profile 1

1

Auto

2

Profile 2

2

Manual*

3

Profile 3

3

*If defined in GCS

Pre-cocking Selection

In GCS go to Trigger>Pre-cocking>Switch mode via Fire Selector and use the toggle button to activate this function.

  1. Fire a shot, burst or pull the trigger while in SAFE mode (only if the safety lever has been removed) * and do not release the trigger.

  2. Switch the Fire Selector within 2 s. There is a single low frequency vibration.

  3. Switch the Fire Selector in any order to change between options, which are indicated by vibrations:

    1. 1 low vibration – Pre-cocking Off

    2. 2 low vibrations – Pre-cocking Auto

    3. 3 low vibrations – Pre-cocking Manual

  4. Release the trigger to save the selected mode.

...