GATE Control Station (GCS)
The GATE Control Station enables you to update the firmware and adjust the settings using the USB-Link or Blue-Link and the GATE Control Station™ App. With GCS, you do not have to remember complicated trigger sequences to program your unit. All features are easily accessible and simple to adjust with just one click.
...
update and upgrade TITAN firmware
change all TITAN settings
calibrate the trigger and fire selector
set trigger sensitivity
check the status of your TITAN sensors
check the statistics of your gun (Rate of Fire, trigger response etc.)
check Diagnostic Trouble Codes (DTC)
contact GATE Support Center (via error report, messenger or phone)
Connecting TITAN via USB-Link
Note
You need a USB-Link to connect your TITAN to the GATE Control Station for Android and Windows/macOS. To connect to the iOS GCS, you must use a Blu-Link.
...
*zawierająca grafiki USB-Linka z różnym podświetleniem*
USB-Link Troubleshooting
USB-Link has a 4-colour LED indicator.
...
We recommend creating your own profile. Though this is not obligatory, it comes in handy when contacting GATE Support.
...
2 Dashboard
Once you log in, you’re taken to the dashboard, which contains 1️⃣ information about the App version and your operating system info as well as 2️⃣ the board version, edition, serial number, and firmware version of the connected TITAN. 3️⃣ Here you can update your unit to the latest firmware version and/or 4️⃣ upgrade the edition to ADVANCED or EXPERT.
...
You can now explore all the funciotionalities.
...
General
...
Restore Default Settings – restores default settings for the various functionalities. Trigger and selector calibration as well as statistics remain unchanged.
...
Active brake - it automatically adjusts the motor’s braking power according to your needs. This prolongs the lifespan of the motor and reduces the heat. Now you can also choose your own value depending on your needs.
Gear ratio - to make the PRE-COCKING work with the highest level of precision you should define the gears type in your AEG. Available types: STANDARD, HIGH TORQUE, HIGH SPEED, DSG, 19-TOOTH.
Typical gear ratio settings (excluding DSG and 19-tooth):
HIGH TORQUE: <15 RPS
STANDARD: 15-25 RPS
HIGH SPEED: >25 RPS
If overspin issue occurs, you should switch the gear type to the next level (e.g. STANDARD to HIGH TORQUE).
Note
Regional lock designed for German players will disable all the burst and auto options.
Note
The DSG and 19-TOOTH gear ratio options are not available for TITAN V2 NGRS.
Trigger
...
Pre-cocking – allows for initial spring compression, which speeds up the trigger response significantly:
AUTO MODE – the spring is automatically compressed after each shot
TRIGGER MODE – slow trigger action compresses the spring, and fast trigger action fires the shot
Please note: using PRE-COCKING increases wear and tear on the gearbox.
...
You will be warned if the trigger sensitivity value reaches extremely low level.
Selector
Fire selector mode – allows you to choose how your replica will behave on each fire selector position:
SAFE – replica will not fire after trigger pull
SEMI – one pull of the trigger will result in only one shot
BURST – one pull of the trigger enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps
AUTO – pulling the trigger causes uninterrupted* series of shots until the trigger is released
*series can be limited by Round Limit
Magazine
Alerts
Statistics
The statistics tab contains main information about your replica performance. You can simply clear each value by clicking “Reset” button. You can also independently reset BB1 and BB2 counter.
TITAN gives you the option to check:
Rate of fire - Minimum, Average, Maximum
Trigger response - Minimum, Average, Maximum
Module’s temperature - Minimum, At this moment, Maximum
Motor current - Average AUTO, Average SEMI, Maximum Peak
Battery voltage - Minimum, Last, Maximum
Number of fired BBs - BB1, BB2, TOTAL
Note
Statistics are saved every ten seconds. If you want to save your statistics immediately, switch the fire selector to SAFE.
Diagnostics
Diagnostic Trouble Codes (DTC) tab
...
If an error occurs, it will be highlighted and described. In such a case, we suggest to follow ”WHAT TO DO” instructions in the first place.
Instructions
| Info |
|---|
Powiązane artykuły
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...