The GATE Control Station
...
App — GCS
...
App
The GCS App enables you to update the firmware and adjust the settings using the USB-Link or Blu-Link and the GCS App. With GCS, you do not have to remember complicated Trigger sequences to program your unit. All features are easily accessible and simple to adjust with just one click.
| Tip |
|---|
Note |
We are constantly improving the GCS App. Each update brings new features and/or corrections. All changes are available in our changelog: https://gatee.eu/technical-support/changelog
...
update and upgrade TITAN firmware
change all TITAN settings
calibrate the Trigger and Selector
set Trigger sensitivity
check the status of your TITAN sensors
check the statistics Telemetry data of your gun (Rate of Fire, Trigger response etc.)
check Diagnostic Trouble Codes (DTCs)
contact GATE Support Center (via error report, messenger or phone)
...
| Tip |
|---|
Note |
...
email us at support@gatee.eu
...
contact us via Facebook: https://www.facebook.com/gatee
...
tel: +48 12 210 05 23
Click here for USB-Link Troubleshooting: https://gateee.atlassian.net/wiki/spaces/GHC/pages/335806634/Information+for+Use+In4U+TTN#USB-Link-Troubleshooting
...
We recommend creating your own profile. Though this is not obligatory, it comes in handy when contacting GATE Support.
...
Dashboard
Desktop Devices
Once you log in, you’re taken to the Dashboard, which contains 1️⃣ information about the GCS App version and your operating system info as well as 2️⃣ the board version, edition, serial number, and firmware version of the connected TITAN. 3️⃣ Here you can update your unit to the latest firmware version and/or 4️⃣ upgrade the edition to the dashboardADVANCED or EXPERT.
Click the mail icon to in the upper right corner to go to messages 5️⃣.
...
Use the radio buttons on the left 6️⃣ to toggle between other options. See the sections below for more information.
If you’re logged in, in the top left corner you will see your nick 7️⃣ next to the GATE logo. Click it and you’re taken to the Preferences screen, where you can check and/or update your account info and privacy settings, submit feedback, get help, read the End User Licence Agreement (EULA) and about GCS itself as well as log out. If you’re not logged in, you still have access to this screen.
...
If your ETU is not connected, you’re able to access Preview mode. Go to New Device 8️⃣.
...
Choose the ETU you want to check out 9️⃣.
...
You can now explore the functionalities with a connected ETU or without.
...
Mobile Devices
Once you log in, you’re taken to the Dashboard, which contains 1️⃣ information about the App version and your operating system info as well as 2️⃣ the board version, edition, serial number, and firmware version of the connected TITAN. 3️⃣ Here you can update your unit to the latest firmware version and/or 4️⃣ upgrade the edition to ADVANCED or EXPERT.
Click the mail icon to in the upper right corner to go to messages 5️⃣.
Use the radio buttons on the left 6️⃣ to toggle between other options. See the sections below for more information.
...