...
Blu-Link is compatible with the GCS App for devices with Android, iOS, and soon also Windows and macOS.
Safety Summary
For your own safety, read the information below carefully before installing the device.
...
| Tip |
|---|
Note
|
Technical Specifications
Supply Voltage Range | 4,75-17 VDC |
|---|---|
Rated Voltage | 11,1 VDC |
Nominal Current Consumption | 280 uA |
Maximum Current Consumption | 45 mA (for 17 VDC) |
Dimensions (Length x Width x Thickness) | 54,5 mm x 19,9 mm x 9 mm |
Finished Product Weight | 9,65 g |
Operating Temperature Range | min. -15° C, max. +50° C |
Relative Humidity | ≤ 80% |
How to Use Blu-Link
...
| Tip |
|---|
Note |
First Connection via the GCS App
Have the PIN number printed on the Blu-Link PIN card handy
Download and install GCS: www.gatee.eu/gcs
Enable Bluetooth® on your device
Enable Location on your device (in order to search for available Blu-Link devices within Bluetooth® range)
Plug the AEG battery into Blu-Link INPUT, the green LED should glow for 1 s
A blinking blue LED means Blu-Link is ready to connect to GCS
Log into GCS
Select New Device in Dashboard
Click Refresh
Select the Blu-Link you want to connect to from the list of available devices
Enter the PIN number
Plug in your AEG/ETU into the Blu-Link OUTPUT connector
Enjoy using Blu-Link
...
| Tip |
|---|
Note |
Plug and Play
Enable Bluetooth® on your device
Enable Location on your device
Plug the AEG battery into the Blu-Link INPUT connector, the green LED should glow for 1 s
Log into the GCS App any time
Select New Device in Dashboard
Select the Blu-Link you want to connect to from the list of available devices
Plug in your AEG/ETU into the Blu-Link OUTPUT connector
Enjoy using Blu-Link
| Tip |
|---|
Note |
Blu-Link Installation in the Replica
Open the stock cover
Remove the stock buffer tube end cap
Plug in your AEG/ETU into the Blu-Link OUTPUT connector
Plug the AEG battery into the Blu-Link INPUT connector
Insert Blu-Link and the battery into the stock buffer tube
Replace the stock cover
Replace the stock buffer tube
Enjoy airsofting
Troubleshooting
...
LED | What happened: | What to do: |
|---|---|---|
 1 s on start | Self-test completed successfully |
|
| Blu-Link has been connected correctly |
|
 BLINKING for 120 s | Blu-Link is ready for Bluetooth connection® | Connect Blu-Link to GCS |
 | Self-test failed, Bluetooth® connection is not possible |
|
 BLINKING |
|
|
 for 120 s | Blu-Link is connected correctly via Blutooth® | Enjoy using Blu-Link |
 | Blu-Link firmware update in progress |
|
 |
|
|
 |
|
|
 BLINKING | Overload, DTC displayed: 2 – ULL, 3 – OCP, 4 – SCP, 5 – OTP | Read what to do in the next section or connect Blu-Link to GCS and check the Diagnostics tab |
 BLINKING | Excessively low voltage, DTC displayed: 1 – UVP1, 2 – UVP2, 3 – UVP3 | Read what to do in the next section or connect Blu-Link to GCS and check the Diagnostics tab |
DTC Codes
Diagnostic Trouble Codes (DTC) indicate basic malfunctions and problems with your battery, AEG, ETU or Blu-Link. You are notified about them by a LED blinking for 120 s after the problem occurs. The Blu-Link DTCs can later be read and cleared in the Diagnostics tab in GCS.
In the Event of Trouble
The LED color reflects the problem type:
Yellow indicates a warning
Red indicates a problem
The number of blinks determines what exactly the problem is.
DTC Explanation
...
| Tip |
|---|
Note |
...
| Tip |
|---|
Note |
Bluetooth® Trademark Attribution
The Bluetooth® by both, the word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by GATE Enterprise sp. z o.o. sp. k. is subject to licensing. Other trademarks and trade names are those of their respective owners.
...
Product Compliance
Certificate of Conformity
GATE Enterprise sp. z o.o. sp. k. hereby declare under our sole responsibility that GATE Blu-Link is in conformity with the essential requirements of the following directives: 2012/19/UE, 2014/53/UE, 2011/65/UE.
...
Product Compliance Regarding the Use of the ANNA-B112 Module
This device complies with Part 15 of the FCC [Federal Communications Commission] Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
...
This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from stations of the same kind, and may not cause harmful interference to systems operating on a primary basis.
Legal Notice
Please read this Legal Notice before operating your device and keep it for future reference.
This document contains important terms and conditions with respect to your device. By using this device, you accept those terms and conditions.
Exclusion of Liability
GATE Enterprise sp. z o.o. sp. k. are not liable for any damages, injuries or accidents of any kind resulting from the use of this product or airsoft gun with the product installed, including (but not limited to) incidental or intentional damages to airsoft gun, airsoft gun parts, batteries and gearbox internals.
Disclaimer
GATE Enterprise sp. z o.o. sp. k. take no responsibility regarding compliance of the product with the requirements of any law, rule or airsoft restrictions pertaining thereto.
Intellectual Property
Intellectual Property owned by GATE Enterprise sp. z o.o. sp. k., including (but not limited to) devices, accessories, parts, software, documentation, is proprietary to GATE Enterprise sp. z o.o. sp. k. and protected under Polish laws, EU laws and international treaty provisions. You may not violate the rights of the Intellectual Property and you will not prepare derivative works of or reverse engineer the device or software. No ownership in the Intellectual Property is transferred to you.
GATE Limited Warranty Policy
GATE Enterprise sp. z o.o. sp. k. warrant that their product is free from manufacturing and material defects at the date of purchase and for a non-extendable period of two (2) years from the date of purchase. This Limited Warranty is conditioned upon proper use of the product by Purchaser.
This Limited Warranty is valid provided that the owner provides a proof of purchase and a properly completed warranty form.
This Limited Warranty does not cover: (a) defects or damage (e.g., mechanical, thermal or chemical) resulting from accident, misuse (misinterpretation of the instructions), abuse, neglect, unusual physical, electrical or electromechanical stress, water immersion, repairs or structural modification of any part of the product, or (b) the product that has its serial number removed or made illegible; (c) defects or damage from improper operation, maintenance or installation; (d) installation of the products.
Requests for warranty are processed as soon as possible, not exceeding 7 (seven) working days. The company’s obligation under this Limited Warranty shall be limited to providing replacement of part(s) only.
Product Disposal Instructions
The symbol shown here means that the product is classified as Electrical or Electronic Equipment and should not be disposed with other household and commercial waste at the end of its working life. The Waste of Electrical and Electronic Equipment (WEEE Directive 2012/19/EU) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment. Purchasers shall take any old electrical equipment to waste recycling public centers or points of sale.
...