Versions Compared

Version Old Version 20 New Version Current
Changes made by

Sebastian Florek-Paszkowski (Unlicensed)

Sebastian Florek-Paszkowski (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Tip

Note
In case you have any difficulties while installing or using this product:

Initial Use

Tip

Note
The battery in your STATUS is not charged. Before the first use, you need to connect STATUS to a power supply for 3 hours.

  1. Once the battery has been charged, attach STATUS to the RIS rail on either side of the replica depending on your eye preference.

  2. Connect STATUS to GCS via Blu-Link. You can download GCS here: https://www.gatee.eu/gcs .

    Image Added

     

     

    Image Added

     

Tip

Note
Bluetooth 4.0 or higher is required.

Tip

Note
STATUS can be attached on either side of your replica. If attached on the right-hand side, change display orientation in GCS, the buttons will be reassigned too.

Tip

Note
STATUS is on whenever connected to a power supply.

 

Continue:
Information for Use (In4U) [STS]

Go back to:
/wiki/spaces/RD/pages/1651834881
Safety & Regulatory Information [STS]

Technical Specifications

Supply Voltage Range

3-5 VDC

Rated Voltage

3.7 VDC

Nominal Current Consumption

280 uA

Maximum Current Consumption

45 mA (for 17 VDC)

Dimensions (Length x Width x Thickness)

47 mm x 60 mm x 54 mm

Finished Product Weight

180 g

Operating Temperature Range

min. -20° C, max. +60° C

Relative Humidity

≤ 80%

...

Go next to:
Installation Guide (InstaG) [STS]

Go back to:
QuickStart Guide (QSG) [STS] /wiki/spaces/RD/pages/1651834881
Information for Use (In4U) [STS]

Filter by label (Content by label)
showLabelsfalse
max5
spacescom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@a32
sortmodified
showSpacefalse
reversetrue
typepage
cqllabel = "kb-how-to-article" and type = "page" and space = "RD"
labelskb-how-to-article

...