Page Comparison

...

1. Have the PIN number printed on the Blu-Link PIN card handy

2. Plug the AEG battery into Blu-Link INPUT, the green LED should glow for 1 s

3. A blinking blue LED means Blu-Link is ready to connect to GCS

4. Download and install GCS: www.gatee.eu/gcs

5. Log into GCS

6. Tap + in Dashboard

   Image Added

7. Enable Bluetooth® on your device

8. Enable Location the required permissions on your device (in order to search for available Blu-Link devices within Bluetooth® range)

9. Plug the AEG battery into Blu-Link INPUT, the green LED should glow for 1 s

10. A blinking blue LED means Blu-Link is ready to connect to GCS

11. Log into GCS

12. Select New Device in Dashboard

    Image Removed

13. Click Refresh

    Image Removed

14. Select ; scanning for Bluetooth® devices commences automatically

15. Select the Blu-Link you want to connect to from the list of available devices; if your device is not found, pull to refresh or tap Refresh Scan

16. Enter the PIN number

17. Plug in your AEG/ETU into the Blu-Link OUTPUT connector

18. Enjoy using Blu-Link

...

Plug and Play

1. Plug the AEG battery into the Blu-Link INPUT connector, the green LED should glow for 1 s

2. Log into the GCS App any time

3. Tap + in Dashboard

4. Enable Bluetooth® on your device

5. Enable Location the required permissions on your device Plug the AEG battery into the (in order to search for available Blu-Link INPUT connector, the green LED should glow for 1 s

6. Log into the GCS App any time

7. Select New Device in Dashboard

8. Select devices within Bluetooth® range), scanning for Bluetooth® devices commences automatically

9. Select the Blu-Link you want to connect to from the list of available devices; if your device is not found, pull to refresh or tap Refresh Scan

10. Plug in your AEG/ETU into the Blu-Link OUTPUT connector

11. Enjoy using Blu-Link

...