...

  1. User's fault: placing washers in wrong order

  2. Result: short circuit and permanent damage to TITAN

  3. How to detect?

   
 

Correct order:

...


2. Trigger Sensor Damage

...

  1. User's fault: incorrect cable routing

  2. Result: damaged or torn off wires by motor gear

  3. How to detect? damaged insulation

...

4. Capacitor Damage

  1. User's fault: mounting TITAN V2 in an ICS gearbox without necessary modifications

  2. Result: the gearbox latch has damaged or torn the yellow capacitor

  3. How to detect? the yellow capacitor is missing or damaged

...

5. Gear Sensor Damage

  1. User's fault: very low shimming of sector gear shimming

  2. Result: torn off gear sensor

  3. How to detect? missing gear sensor

...


Less frequently encountered:

 6. Fire Selector Sensor Damage

...

  1. User's fault: using too much force during motor connector bending, bending connector to connectors wrong sideway

...

  1. Image Added
  2. Result: broken motor connector

  3. How to detect? motor connector broken in half

...

  1. User's fault: accidentallycutting both positive and negative wires with the body of the replica

  2. Result: Insulation damage, short circuit

  3. How to detect? Burnt visibly cut wires

11. Repairs or Structural Modification of any TITAN Part (including rewiring and component replacement)

  1. User's fault: interference in the structure of the unit

  2. Result: automatic warranty loss

  3. How to detect? visible changes such as different wire color

...

Cases when warranty should be accepted:

  1. recurring E01 to E06, E13, E14, and E15 errors

  2. total absence of reaction from the unit without visible damage

  3. no connection with USB-Link and/or Tactical Programming Card even if the unit is working properly without any visible damage (no programming option)

  4. recurrence of error E07 combined with no cycle detection (after very accurate detailed troubleshooting)

Info

In case of any doubts please contact our Support at:

support@gatee.eu

tel. +48 12 210 05 23
Office office hours: 9:00 am – 4:00 pm CET
Monday through Friday

...