Page Comparison

The most common mistakes:

1. Washer Issue

• User's fault: placing washers in wrong order

• Result: short circuit and permanent damage to TITAN

• How to detect?

Correct order:

...

2. Trigger Sensor Damage

• User's fault: pulling the trigger when the gearbox is open

• Result: torn off trigger sensors
  TITAN will not be able to detect all 5 trigger sensitivities even if using a standard trigger (please note that in the case of speed triggers TITAN cannot detect all trigger sensitivities either, which does not mean that sensors are damaged).

• How to detect? missing trigger sensors (receivers)

...

3. Cable Damage

• User's fault: incorrect cable routing

• Result: damaged or torn off wires by motor gear

• How to detect? damaged insulation

...

4. Capacitor Damage

• User's fault: mounting TITAN V2 in an ICS gearbox without necessary modifications

• Result: the gearbox latch has damaged or torn the yellow capacitor

• How to detect? yellow capacitor is missing or damaged

...

5. Gear Sensor Damage

• User's fault: very low sector gear shimming

• Result: torn off gear sensor

• How to detect? missing gear sensor

...

Less frequently encountered:

 6. Fire Selector Sensor Damage

• User's fault: incorrect bottom board placement in gearbox shell

• Result: torn off Fire Selector sensor

• How to detect? one of the trigger sensors missing

7. Motor connector damage

• User's fault: using too much force during motor connector bending, bending connectors wrong way
  

...

• Image Added

• Result: broken motor connector

• How to detect? motor connector broken in half

 8. Reverse polarity

• User's fault: plugging a battery into the unit in incorrect order (a negative wire with a positive wire and a positive wire with a negative wire)

• Result: destroying the main parts of the board

• How to detect? theunit is not responding, the entire board is burnt

...

9. Wire Damage (Caused by Trigger)

• User's fault: incorrect wire placement in gearbox shell

• Result: torn wire insulation

• How to detect? tornwire insulation close to the trigger

 10. Short Circuit Caused by Damaging Cable Insulation

• User's fault: accidentallycutting both positive and negative wires with the body of the replica

• Result: Insulation damage, short circuit

• How to detect? visibly cut wires

11. Repairs or Structural Modification of any TITAN Part (including rewiring and component replacement)

• User's fault: interference in the structure of the unit

• Result: automatic warranty loss

• How to detect? visible changes such as different wire color

...

...

Other Cases When Warranty May Be Accepted:

1. recurring Recurring E01 to E06, E13, E14, and E15 errors

2. total absence of No reaction whatsoever from the unit without visible damage

3. no No connection with USB-Link and/or Tactical Programming Card even if the unit is working properly without any visible damage (no programming option)

4. recurrence Recurrence of error E07 combined with no cycle detection (after detailed troubleshooting)
   

Related articles

...