Versions Compared

Version Old Version 132 New Version 133
Changes made by

Sebastian Florek-Paszkowski (Unlicensed)

Sebastian Florek-Paszkowski (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Tip

Note
You can use Blu-Link without an ETU. It will work as a smart fuse and a multifunctional wattmeter enabling you to, e.g., read Telemetry data.

...

Initial Use

Note

Caution
Please follow the steps below when first connecting Blu-Link. Do not use your mobile Android device’s system options to pair Blu-Link. In case you have done so, unpair the devices first.

  1. Have the PIN number printed on the Blu-Link PIN card handy

  2. Plug the AEG battery into Blu-Link INPUT, the green LED should glow for 1 s

  3. A blinking blue LED means Blu-Link is ready to connect to GCS

  4. Download and install GCS: www.gatee.eu/gcs

  5. Log into GCS

  6. Tap + in Dashboard

  7. Enable Bluetooth® on your device

  8. Enable the required permissions on your device (in order to search for available Blu-Link devices within Bluetooth® range); scanning for Bluetooth® devices commences automatically

  9. Select the Blu-Link you want to connect to from the list of available devices; if your device is not found, pull to refresh or tap Refresh Scan

  10. Enter the PIN number

  11. Plug in your AEG/ETU into the Blu-Link OUTPUT connector

  12. Enjoy using Blu-Link

...