| Table of Contents | ||||
|---|---|---|---|---|
|
...
Fire a shot, burst or pull the trigger while in SAFE (only if the safety lever has been removed) and do not release the trigger.
Switch the selector within 2–7 s. There is a single high frequency vibration.
Switch the selector in any order to change between options, which are indicated by vibrations.
1 high frequency vibration – Profile 1
2 high frequency vibrations – Profile 2
3 high frequency vibrations – Profile 3
Release the trigger to save the selected profile.
...
Each vibration type corresponds to an issue type
High frequency vibrations: warning
Low frequency vibrations: problem
Low-High frequency vibrations: device failed self-test
High-Low vibrations: another error
The number of vibrations determines exactly what the problem is (for reference read the DTC explanations presented later on in this guide)
...
TITAN V2 has the following optical sensors:
1 sector gear sensor
2 selector sensors
5 trigger sensors
...
Installation
Please read the installation guide below before proceeding.
...
TITAN V3 has the following optical sensors:
1 sector gear sensor
1 selector sensor
1 proximity trigger sensor
...
Installation
Please read the installation guide below before proceeding.
...
TITAN V2 NGRS has the following optical sensors:
2 gear sensors
1 selector sensor
1 trigger sensor
1 bolt catch sensor
...
Installation
Please read the Installation Guide below before proceeding.
...