...

The information contained in this document is subject to change without notice for specification changes or other reasons. When using a product listed here be sure to obtain the latest specifications. Please read the QuickStart Guide (QSG) [STA] first.

Connecting STATUS, GCS & ETU

Please pair STATUS with the GATE Control Station App as well as connect your Electronic Trigger Unit in order to enjoy all the available functionalities, you can download GCS here: https://www.gatee.eu/gcs

...

8. Enable the required permissions on your device (in order to search for available STATUS and Blu-Link devices within Bluetooth® range); scanning for Bluetooth® devices starts automatically

9. Select From the list of available devices, select the Blu-Link you want to connect to from the list of available devices; if . If your device is not found, pull to refresh or tap Refresh Scan

...

14. Tap + on the Dashboard

15. Choose From the list of the available devices, choose the STATUS you want to connect to from the list of the available devices; if . If the device is not found, pull to refresh or tap Refresh Scan.

16. Enter PIN

Once complete, you’re taken back to Dashboard,pair STATUS and Blu-Link

...

17. Enjoy using STATUS

Navigation

You can perform basic configuration navigating the STATUS Menu using the two rear buttons referred to as [UP] and [DOWN] for left and right-hand side orientation. The buttons are reassigned automatically for other orientations set in the STATUS Main Menu, for top and bottom orientations, the buttons become LEFT and RIGHT respectively. Below you will find a description of STATUS Dashboards and Menus in default settings, i.e. left-hand side orientation.

...

PRESS UP: go up, previous Dashboard

PRESS [DOWN]: go down, go to the next Dashboard

PRESS [UP+DOWN]: enter, accept, accept & exit, confirm, go to the QUICK ACCESS Menu from any Dashboard, unlock screen

...

PRESS & HOLD 2 s [UP+DOWN]: on any Back option: go to the last Dashboard used

Dashboards

Once you turn STATUS on, you’re taken to the last Dashboard you displayed.

Dashboard 1

The top bar indicates:

...

• active Bluetooth®

• Bluetooth® connection with

  • GCS (G)

  • Blu-Link (B)

  • GATE ETU (flashing E), TITAN (T), ASTER (A) or (H) HPA

• the Hop-up assistant – a visual indicator of the angle of tilt of the replica angle

• remaining STATUS Battery Life as a percentage

...

• the widget icon indicating either the remaining estimated number of BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

...

• the status bar visually indicating the number of BBs left

• the 4-Digit Counter indicating the number of BBs left; if there are 10000 9999 or more BBs left, the counter displays 9999; whenever STATUS is updating data from Blu-Link, you will see: - - - - (in the case of HPA instead of - - - - you will see the value set in Rem BBs/Mag)

...

If you press [DOWN] within this Dashboard, you go to:

Dashboard 2

The top bar indicates, as previously:

...

• active Bluetooth®

• Bluetooth® connection with

  • GCS (G)

  • Blu-Link (B)

  • GATE ETU (flashing E), TITAN (T), ASTER (A) or (H) HPA

• the Hop-up assistant – a visual indicator of the replica angle of tilt of the replica

• remaining STATUS Battery Life as a percentage

...

• the widget icon indicating either the remaining estimated number of BBs you can fire using the replica battery (in the Menu indicated as as Rem BBs/Batt Batt – this option is not available for HPA) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• 4-Digit Counter indicating the number of BBs left; if there are 10000 9999 or more BBs left, the counter displays 9999; the font size adjusts dynamically to display either 4 or 3 digits; whenever STATUS is updating data from Blu-Link, you will see: - - - - 
  (in the case of HPA instead of - - - you will see the value set in Rem BBs/Mag)

...

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining estimated number of BBs you can fire using the replica battery (this option is not available for HPA)

• Rem BBs/Mag – remaining the number of BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calories Burnt – the number of calories you’ve burnt

• All BBs Fired – the number of BBs fired since turning STATUS on

If you press [DOWN] within this Dashboard, you go to:

Dashboard 3

The MAIN WIDGET includes:

...

• the widget icon indicating either the remaining estimated number of BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• 4-Digit Counter indicating the number of BBs left; if there are 10000 9999 or more BBs left, the counter displays 9999; the font size adjusts dynamically to display either 4 or 3 digits; whenever STATUS is updating data from Blu-Link, you will see: - -
  (in the case of HPA instead of - - you will see the value set in Rem BBs/Mag)

...

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt –the remaining estimated number of BBs you can fire using the replica battery (this option is not available for HPA)

• Rem BBs/Mag – remaining the number of BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calories Burnt – the number of calories you’ve burnt

• All BBs Fired – the number of BBs fired since turning STATUS on

If you press [DOWN] within this Dashboard, you go to:

Dashboard 4

The MAIN WIDGET includes:

...

• the widget icon indicating either the remaining estimated number of BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• 4-Digit Counter indicating the number of BBs left; if there are 10000 9999 or more BBs left, the counter displays 9999; the font size adjusts dynamically to display either 4 or 3 digits; whenever STATUS is updating data from Blu-Link, you will see: -
  (in the case of HPA instead of - you will see the value set in Rem BBs/Mag)

If you press [DOWN] within this Dashboard, you go back to Dashboard 1.

QUICK ACCESS Menu

PRESS [UP+DOWN] to go to the QUICK ACCESS Menu from any Dashboard

...

All items with an arrow pointing right > (e.g. QUICK ACCESS > Main Menu > System > Temp Unit > ‘C, 'F, Back) are Submenus that can be accessed further and reveal more items to choose from.

QUICK ACCESS

Bolt Catch RST – reset the number of BBs

...

Cancel – go back to the last displayed Dashboard

MAIN MENU

...

Dashboards – configure what is shown/hidden in each of the four Dashboards

...

Cancel – go back to the last displayed Dashboard

DASHBOARDS

...

DASHBOARD 1 – Dashboard 1 configuration

...

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 1

...

MAIN WIDGET – configure the Main Widget to indicate either the the remaining estimated number of BBs you can fire using the replica battery (Rem BBs/Batt) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

...

TL WIDGET – configure the Top Left Widget; the example below shows the remaining how many BBs are left in the magazine:

...

TR WIDGET – configure the Top Right Widget; the example below shows the distance traveled:

...

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining estimated number of BBs you can fire using the replica battery

• Rem BBs/Mag – remaining the number of the BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calorie Count – the number of calories you’ve burnt

• All BBs Fired - the number of bullets fired since the STATUS was switched on

or you can Hide the widget

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 2

...

MAIN WIDGET – configure the Main Widget to indicate either the the remaining estimated number of BBs you can fire using the replica battery (Rem BBs/Batt) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

...

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining estimated number of BBs you can fire using the replica battery

• Rem BBs/Mag – remaining the number of the BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calorie Count – the number of calories you’ve burnt

• All BBs Fired - the number of bullets fired since the STATUS was switched on

or Hide the widget

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 3

...

MAIN WIDGET – configure the Main Widget to indicate either the remaining the estimated number of BBs you can fire using the replica battery (Rem BBs/Batt) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

...

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining estimated number of BBs you can fire using the replica battery

• Rem BBs/Mag – remaining the number of the BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calorie Count – the number of calories you’ve burnt

• All BBs Fired - the number of bullets fired since the STATUS was switched on

or Hide the widget

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 4

...

MAIN WIDGET – configure the Main Widget to indicate either the the remaining estimated number of BBs you can fire using the replica battery (Rem BBs/Batt) or the number of the remaining BBs left in the magazine (Rem BBs/Mag)

...

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

Selector Positions

...

HPA Compatibility

To use STATUS with HPA, you must use Blu-Link to pass the necessary data to STATUS. To enable HPA, you must use the GCS interface. Note that HPA compatible features are:

• Rem BBs/Mag - the number of BBs in the magazine

• Rem Mags - the number of magazines you have besides the one in the replica

Selector Positions

When you switch the selector on your replica this is reflected in STATUS for a few seconds.

...

Screen Lock

You can set automatic screen lock after 5, 10, 15 or 30 s of idleness. You will be informed about a locked screen with a relevant message. PRESS [UP+DOWN] on a locked screen to unlock it.

...

Update Mode

Whenever you PRESS & HOLD 8 s [UP+DOWN] or launch an update in the GATE Control Station, the splash screen is displayed informing you about Update Mode, showing . The splash screen shows the serial number of your STATUS and as well as the bootloader version. Press any button to continue unless you are performing an update via the GCS App.

...

Complete STATUS Menu

...