Versions Compared

Version Old Version 9 New Version 10
Changes made by

Sebastian Florek-Paszkowski (Unlicensed)

Aleksandra Hajdon (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note

Caution
The nozzle sleeve can only be used with HPA engines to stabilize the nozzle. It should not be used with AEG replicas. In the case of the HPA PULSAR S engine, the nozzle sleeve should not be used together with the purple nozzle. It can only be used with the golden nozzle of the HPA PULSAR S engine if there is a midcap syndrome problem.

The purple nozzle of the HPA PULSAR S engine does not require the use of a stabilizing sleeve in the hop-up chamber. The use of a stabilizing sleeve with the purple nozzle may negatively affect engine performance.

The golden nozzle of the HPA PULSAR S engine may require additional stabilization. In this case, it is recommended to use a stabilizing sleeve in the hop-up chamber.

...

Technical Specifications

Hop-Up Chamber Weight

15 g

Dimensions (Length x Width x Thickness)

52 mm x 39 mm x 16.8 mm

Materials Used

Aluminium, POM

Operating Temperature Range

min. -15° C, max. +50° C

Relative Humidity

≤ 80%

...