...
What to do if there is no nozzle cycle?
Take the engine apart and check for excess grease - on the flat surface of the nozzle and the bottom of the cylinder in which it movesThe engine works correctly from about 60-70 PSI. If there is no full nozzle cycle, you can increase the pressure on the regulator and reduce the nozzle cycle time. If this does not help, you can install a tappet plate spring with a smaller force.
User Manual – TITAN II Bluetooth® V2 gearbox drop-in FCU mosfet HPA
...
The design and production of the device is based on harmonized standards.
Solenoid Voltage Range | 5-8.4 V |
|---|---|
Operating Pressure | 60-140 PSI - high pressure only |
Gas Consumption | For 90 PSI and a 48 ci/0.8 l 300 bar/4500 PSI bottle - 0.7 PSI per shot |
Dimensions (Length x Diameter) | 88 mm x 25.4 mm |
Finished Product Weight | 75 g |
Operating Temperature Range | min. -15° C, max. +50° C |
Relative Humidity | ≤ 80% |
Stay tuned with GATE
Join the GATE Airsoft Community Discord Server!
http://facebook.com/Gatee
http://youtube.com/GateMovies
http://instagram.com/GateEnterprise
Manufactured by GATE Enterprise sp. z o.o. sp. k.
Torowa 3H
PL-30435 KRAKÓW
email: office@gatee.eu
tel: +48 48 12 210 05 23
...