...
| Tip |
|---|
Note
In case you have any difficulties while installing or using this product: |
...
| Note |
|---|
Caution
Use a metal washer with a diameter of max. 8 mm [0.31 inch] to avoid damaging TITAN. |
...
| Tip |
|---|
Note
Use the trigger sticker to make it visible for the trigger sensor. |
...
Image Added
| Tip |
|---|
Note
TITAN can detect trigger position very precisely. In order to increase sensitivity, you need to eliminate trigger backlash. The set contains 3 trigger anti-backlash stickers of various thicknesses. Try each one of them or a combination of more than one and choose the most appropriate one. |
...
Image Added
| Tip |
|---|
Note
The selector plate requires modification. Place the selector sticker according to the photos below. Its position is crucial. |
...
Image Added
| Note |
|---|
Caution
In TITAN V3 the connectors must be straight according to the photo below. Bending and straightening the connectors back may cause them to break. If this should happen, spare terminals are included in the INSTALLATION KIT. |
...
Image Added
TITAN V2 NGRS
...
| Warning |
|---|
Warning
If you are using a recoil system and set excessive trigger sensitivity, it may cause accidental discharge (firing) even without pressing the trigger. |
...
| Tip |
|---|
Note
In case you have any difficulties while installing or using this product: |
...
TITAN V2 has the following optical sensors:
1 sector gear sensor
2 selector sensors
5 trigger sensors
...
Installation
Please read the installation guide below before proceeding.
...
TITAN V3 has the following optical sensors:
1 sector gear sensor
1 selector sensor
1 proximity trigger sensor
...
Installation
Please read the installation guide below before proceeding.
...
TITAN V2 NGRS has the following optical sensors:
2 gear sensors
1 selector sensor
1 trigger sensor
1 bolt catch sensor
...
Installation
Please read the Installation Guide below before proceeding.
...