Versions Compared

Version Old Version 14 New Version 15
Changes made by

Sebastian Florek-Paszkowski (Unlicensed)

Sebastian Florek-Paszkowski (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note

Caution
If the spring you have installed is stronger than the one from the factory, it may be necessary to set a higher operating pressure, which will result in a higher firing rate. You will then need to shorten the Main Valve Time (DP) to achieve lower FPS. Conduct the process according to the following steps:

  • increase the pressure on the regulator until the BBs are properly fed

  • decrease the Main Valve Time (DP) until the desired muzzle velocity is achieved

Which is the recommended hop-up bucking?

Everything always depends on the chamber, the power of the replica and the BBs used. In general, we recommend testing individually in your configuration, because there is no rule that any bucking will always work. From our experience, most often these work correctly as:

  • blue Madbull

  • TNT

  • Poseidon Pegasus

User Manual – TITAN II Bluetooth® V2 gearbox drop-in FCU mosfet HPA

...

Solenoid Voltage Range

5-8.4 V

Operating Pressure

60-140 PSI - high pressure only

Gas Consumption

For 90 PSI and a 48 ci/0.8 l 300 bar/4500 PSI bottle - 0.7 PSI per shot

Dimensions (Length x Diameter)

88 mm x 25.4 mm

Finished Product Weight

75 g

Operating Temperature Range

min. -15° C, max. +50° C

Relative Humidity

≤ 80%

Stay tuned with GATE

GATE HELP CENTER

http://www.gatee.eu/

Join the GATE Airsoft Community Discord Server!
http://facebook.com/Gatee
http://youtube.com/GateMovies
http://instagram.com/GateEnterprise

Manufactured by GATE Enterprise sp. z o.o. sp. k.
Torowa 3H
PL-30435 KRAKÓW
email: office@gatee.eu

tel: +48 12 210 05 23

http://www.gatee.eu/

http://help.gatee.eu© 2024 GATE Enterprise sp. z o.o. sp. k.