Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Congratulations on your new USB-Link!

It allows you to simply easily update the firmware and adjust the settings of a compatible GATE device (edit: AEG Controller) using the GATE Control Station app.

...

See also the full user guide at: www.gatee.eu/manuals

FOR YOUR OWN SAFETY, PLEASE READ THE SAFETY INFORMATION CAREFULLY BEFORE INSTALLING THE DEVICE

INSTRUCTIONAL ICONS

DANGER: (nie ma takowego i chyba nie ma potrzeby - zdanie do wyrzucenia)

Safety Summary

For your safety, read the safety information below carefully before installing the device.

Warning
Situations that may cause dangerous injuries injury to yourself or others.

CAUTION: Caution
Situations that may cause damage to your device or other equipment.

WARNING: Situations that may cause injury to yourself or others.

NOTICE: Notice
Notes, usage tips or additional information.SAFETY SUMMARY

Caution
CAUTION: Prevent the USB-Link and the small end of cable from contact with conductive materials (e.g., dust, liquid, metal powder).

NOTICE: Notice
Do not remove the device protective foil.

Notice
NOTICE: The Product product Warranty Form is available on our website:
WWWwww.GATEEgatee.EU/WARRANTYNOTICE: eu/warranty

Notice
In case you have any difficulties while installing or using this product,
we recommend to:
a) email us at support@gatee.eu
b) contact us via Facebook:
https://www.facebook.com/gatee/
c) call (+48) 122-100-523

HOW TO USE USB-LINK? (To przedstawialiśmy graficznie na pudełku, więc pewnie nie ma sensu powtarzać w QS)

  1. Download and install the GATE Control Station:
    www.gatee.eu/GCS

  2. Connect the USB-Link to PC or smartphone using USB cable. The dedicated cables:

    PC:
    USB-A cable for USB-Link

    Smartphones:
    Micro-USB cable for USB-Link
    USB-C cable for USB-Link

Notice
NOTICE: The Micro-USB cable has the same connectors on both sides. However, it is very important which end of cable you to connect to the USB-Link and smartphone . It to appropriate ends of the cable. Otherwise, it will not work reversely.

3. If in case of PC, you cannot see your device on the list or it is accompanied by exclamation mark, it means that you must install the device’s driver manually. You can download the driver here:
www.ftdichip.com/Drivers/VCP.htm

...

5. Connect a compatible device with
deans-t connector to the USB-Link.

TROUBLESHOOTING (To będzie na karcie, więc nie kopiuję)

COMPATIBLE WITHCompatible with

TITAN V2
TITAN V3
TITAN V2 NGRS
TITAN TACTICAL PROGRAMMING CARDTactical Programming Card
ASTER V2

STAY TUNED WITH Stay tuned with GATE

facebook.com/Gatee
youtube.com/GateMovies
twitter.com/GateEnterprise
instagram.com/GateEnterprise

...