Congratulations on your new USB-Link!
...
Notice
In case you have any difficulties while installing or using this product:
a) email us at support@gatee.eu
b) contact us via Facebook:
https://www.facebook.com/gatee/
c) call (+48) 122-100-523
HOW TO USE USB-LINK? (To przedstawialiśmy graficznie na pudełku, więc pewnie nie ma sensu powtarzać w QS)
Download and install the GATE Control Station:
www.gatee.eu/GCS
Connect the USB-Link to PC or smartphone using USB cable. The dedicated cables:
PC:
USB-A cable for USB-LinkSmartphones:
Micro-USB cable for USB-Link
USB-C cable for USB-Link
...
5. Connect a compatible device with
deans-t connector to the USB-Link.
TROUBLESHOOTING (To będzie na karcie, więc nie kopiuję)
The USB-Link has 4-color LED indicator.
...
BLUE (glowing) – the USB-Link is connected to PC or smartphone. A compatible device is not connected or the PC driver is not installed. You can download the driver here:
www.ftdichip.com/Drivers/VCP.htm
BLUE (blinking) - the USB-Link does not have an installed firmware. Please install the firmware.
...
GREEN (glowing) – the USB-Link is connected to the PC and compatible device.
GREEN (blinking) – the USB-Link is connected to the PC and compatible device, but the device does not have an installed firmware. Please install the device’s firmware.
...
YELLOW (glowing) – the USB-Link is transmitting data.
...
RED (glowing) – communication with the connected device was interrupted during settings’ saving. The device’s settings may be transmitted incorrectly. Please check the connection between the USB-Link and device.
Compatible with
TITAN V2
TITAN V3
TITAN V2 NGRS
TITAN Tactical Programming Card
ASTER V2
...