Congratulations on your new USB-Link!
...
With the GCS app, you can control your airsoft gun from smartphone or tablet with Android and PC with Windows or macOS.
...
See also the full user guide manual at: www.gatee.eu/manuals (nie ma takowego i chyba nie ma potrzeby - zdanie do wyrzucenia)
Safety Summary
For your safety, read the safety information below carefully before installing the device.
...
Notice
The product Warranty Form is available on our website: www.gatee.eu/warrantywarranty
Notice
In case you have any difficulties while installing or using this product:
a) email us at support@gatee.eu
b) contact us via Facebook:
https://www.facebook.com/gatee/
c) call (+48) 122-100-523
HOW TO USE USB-LINK? (To przedstawialiśmy graficznie na pudełku, więc pewnie nie ma sensu powtarzać w QS)How to use USB-Link
Download and install the GATE Control Station:
www.gatee.eu/GCSgcs
Connect the USB-Link to PC, Mac or smartphone using USB cable. The dedicated one of the dedicated USB cables:
PC:/Mac
USB-A cable for USB-Link
Smartphones:
Micro-USB cable for USB-Link
USB-C cable for USB-Link
Notice
Micro-USB cable has the same connectors on both sides. However, it is very important to connect the USB-Link and smartphone to appropriate ends of the cable. Otherwise, it will not work.
Notice
3. If in case of PC, you cannot see your device USB-Link on the list or it is accompanied by exclamation mark, it means that you must install the device’s appropriate driver manually. You can download the driver here:
www.ftdichipgatee.com/Drivers/VCP.htmeu/drivers
4. Read the device’s USB-Link manual and get familiar with the functions:
www.gatee.eu/MANUALS ???
5. Connect a compatible device with
deans-t T connector to the USB-Link.
TROUBLESHOOTING
The USB-Link has a 4-color LED indicator.
...
BLUE (glowing) – the USB-Link is connected to PC, Mac or smartphone. A compatible device AEG Controller is not connected or the PC/Mac driver is not installed. You can download the driver here:
www.ftdichipgatee.com/Drivers/VCP.htmeu/drivers
BLUE (blinking) - – the USB-Link does not have an firmware installed firmware. Please install the USB-Link firmware via GCS.
...
GREEN (glowing) – the USB-Link is connected to the PC and compatible device., Mac or smartphone and AEG Controller
GREEN (blinking) – the USB-Link is connected to the PC and compatible device, Mac or smartphone and AEG Controller, but the device Controller does not have an firmware installed firmware. Please install the device’s its firmware via GCS.
...
YELLOW (glowing) – the USB-Link is transmitting data.
...
RED (glowing) – communication with the connected device AEG Controller was interrupted during settings’ while saving . The device’s settings may be transmitted incorrectlysettings, which may have been transmitted incorrectly. Please check the connection between the USB-Link and deviceAEG Controller.
Compatible with
TITAN V2
TITAN V3
TITAN V2 NGRS
TITAN Tactical Programming Card
ASTER V2
...