...
Notice
If in case of PC or Mac, you cannot see your USB-Link on the list or it is accompanied by exclamation mark, you must install appropriate driver manually. You can download the driver from: www.gatee.eu/drivers
43. Read USB-Link manual and get familiar with the functions: www.gatee.eu/manuals
54. Connect a compatible device with deans-T connector to the USB-Link.
Troubleshooting
USB-Link has a 4-color LED indicator.
...
Blue (glowing) – the USB-Link is connected to PC, Mac or smartphone. AEG Controller is not connected or PC/Mac driver is not installed. You can download the driver here: www.gatee.eu/drivers
Blue (blinking) – the USB-Link does not have firmware installed. Please install the USB-Link firmware via GCS.
...
Green (glowing) – the USB-Link is connected to PC, Mac or smartphone and AEG ControllerGreen (blinking) – the USB-Link is connected to PC, Mac or smartphone and AEG Controller, but the Controller does not have firmware installed. Please install its firmware via GCS.
...
Yellow (glowing) – the USB-Link is transmitting data.
...
Red (glowing) – communication with AEG Controller was interrupted while saving settings, which may have been transmitted incorrectly. Please check the connection between the USB-Link and AEG Controller.
Compatible with
TITAN V2
TITAN V3
TITAN V2 NGRS
TITAN Tactical Programming Card
ASTER V2
...