...
3. Connect Blu-Link to the AEG battery top side up
4. If LED glows is glowing green, go to the next step. If not, see Blu-Link Troubleshooting Card (included in the kit)
5. Log in to the GCS app
6. Prepare PIN printed on Blu-Link box
7. Connect Blu-Link by following instructions displayed in GCS*
78. Disconnect Blu-Link from the battery
89. Connect Blu-Link again to make sure changes have been saved
910. Connect the battery with attached Blu-Link to the AEG/ETU
1011. Place the battery in the stock* Connecting
11. Enjoy using Blu-Link
Notice
Connecting Blu-Link with other device devices with GCS app will require authorization using your individual/personal PIN code set in the app during the first connection.
Notice
Except for the first connection, Blu-Link can stay attached all the time – you do not have to disconnect it after skirmish.
Notice
Keep the Blu-Link package box or save PIN printed on it – you will need it in case the device is damaged, lost or stolen.
...