...
2. Enable Bluetooth (version 4.1 or later) on your device
3. Connect Attach Blu-Link to the AEG battery top side up
...
7. Connect Blu-Link by following instructions displayed in GCS
8. Disconnect Detach Blu-Link from the battery
9. Connect Attach Blu-Link again to make sure changes have been saved
...
11. Place the battery in the stock
11. Enjoy using Blu-Link*
* Except for the first connection, Blu-Link can stay attached all the time – you do not have to detach it after skirmish.
Notice
Connecting Blu-Link with other devices with GCS app will require authorization using your individual/personal PIN code set in the app during the first connection. Notice
Except for the first connection, Blu-Link can stay attached all the time – you do not have to disconnect it after skirmish.
Notice
Keep the Blu-Link box or save PIN printed on it – you will need it in case the device is damaged, lost or stolen.
Notice
Remember or keep your individual PIN in safe place.
After the first connection
If Blu-Link is detached
Attach Blu-Link to the AEG battery top side up
If LED is glowing green, go to the next step. If not, see Blu-Link Troubleshooting Card
Log in to the GCS app
Connect Blu-Link by following instructions displayed in GCS ?
Connect the battery with attached Blu-Link to the AEG/ETU
Place the battery in the stock
Enjoy using Blu-Link
If Blu-Link is attached
Log in to the GCS app
Connect Blu-Link by following instructions displayed in GCS
Enjoy using Blu-Link
Compatible with:
TITAN V2
TITAN V3
TITAN V2 NGRS
ASTER V2
ASTER V3
STATUS
...