...
Congratulations on your Blu-Link!
Now It allows you are able to control your GATE ETU and connect it with other compatible devices wirelessly via GATE Control Station app. Moreover, Blu-Link is an additional fuse and wattmeter enabling to, i.e., read telemetry data.
...
Notice
In case you have any difficulties while installing or using this product:
a) email us at : support@gatee.eu
b) contact us via Facebook: https://www.facebook.com/gatee
c) call (+48) 122-100-523
How to use Blu-Link
Plug and play
Attach Blu-Link to the AEG battery top side up
If LED is glowing green, go to the next step. If not, see Blu-Link Troubleshooting Card (included in the kit)
Connect the battery with attached Blu-Link to the AEG/ETU
Place the battery in the stock
Enjoy using Blu-Link
Notice
Blu-Link
...
can stay attached all the time – you do not have to detach it after skirmish.
Connection via GCS
Download and install GATE Control Station:
www.gatee.eu/gcs
(QR code)
2. Enable Bluetooth on your device (version 4.1 or later) on your device
3. Attach Blu-Link to the AEG battery top side up
...
6. Prepare PIN printed on Blu-Link box*
7. Connect Blu-Link by following instructions displayed in GCS
8. Detach Blu-Link from the battery
9. Attach Blu-Link again to make sure changes have been saved
10. Connect the battery with attached Blu-Link to the AEG/ETU
11. Place the battery in the stock
11. Enjoy using Blu-Link*
* Except for the first connection, Blu-Link can stay attached all the time – you do not have to detach it after skirmish. Notice
Connecting First-time connection of Blu-Link with other and devices with GCS app will require requires authorization using your individual/personal PIN code set in the app during the first connectionfrom the box.
Notice
Keep the Blu-Link box or save PIN printed on it – you will need it in case the device is damaged, lost or stolen.Notice
Remember or keep your individual PIN in safe place.
...
If Blu-Link is detached
...
Attach Blu-Link to the AEG battery top side up
...
If LED is glowing green, go to the next step. If not, see Blu-Link Troubleshooting Card
...
Log in to the GCS app
...
Connect Blu-Link by following instructions displayed in GCS ?
...
Connect the battery with attached Blu-Link to the AEG/ETU
...
Place the battery in the stock
Enjoy using Blu-Link
If Blu-Link is attached
Log in to the GCS app
Connect Blu-Link by following instructions displayed in GCS
Enjoy using Blu-Link
Compatible with:
TITAN V2
TITAN V3
TITAN V2 NGRS
ASTER V2
ASTER V3
STATUS
...
(RoHS compliance marking)
Product compliance
...
regarding the use of ANNA-B112 module
This device complies with Part 15 of the FCC [Federal Communications Commission] Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
...