Congratulation on your new Blu-Link!
...
Caution
Connecting battery with voltage over 17 V will cause permanent damage to the device, which is not covered by the warranty.
Caution
Do not remove the device’s device protective heat-shrink tube.
...
Diagnostic Trouble Codes (DTC) inform about basic malfunctions and problems with your battery, AEG, ETU or Blu-Link. You are notified of them by LED blinking for 2 minutes after the problem occurs. The Blu-Link’s Link DTC can be later read and cleared in DTC menu in GCS app.
...
The color of LED reflects on the problem type:
Yellow indicates a warning
Red indicates a critical problem
Number of blinks determines what exactly the problem is (for reference, read DTC explanations presented later on in this guide)
DTC explanations
grafika - flaga w kolorze i z liczba plus strzałki wyjaśniające
dodać za liczbą mignięć znak “x” np. 2x
przemyśleć bardziej obrazowe oznaczanie liczby mignięć, np. warfet, 4 błyśnięcia:
Notice
If you use an ETU connected to Blu-Link, check also the ETU 's DTC. Blu-Link is designed to withstand higher power load and lower voltage than ETU, so in most cases, an the ETU protection turns on earlier and the Blu-Link does not detect the problem.
...
This device complies with Part 15 of the FCC [Federal Communications Commission] Rules. Operation is subject to the following two conditions; : (1) this device may not cause harmful interference, ; and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This this device may not cause interference; and (2) This this device must accept any interference, including interference that may cause undesired operation of the device.
...