...

Note
Caution Do not disassemble or take apart STATUS. The casing has been sealed in two places: beneath the two display mounting screws, where the display adjoins the body and around the screw facing the RIS railhousing has been secured with warranty seals. Any broken seal voids warranty.

Tip

Note
In case you have any difficulties while installing or using this product:

Initial Use

Tip
Note The battery in your STATUS is not charged. Before the first use, you need to connect STATUS to a power supply for 3 hours.

Once the battery has been charged, attach STATUS to the RIS rail on either side of the replica depending on your eye preference.
Connect STATUS to GCS via Blu-Link. You can download GCS here: https://www.gatee.eu/gcs .
Image Added

Image Added

Tip
Note Bluetooth 4.0 or higher is required.

Tip
Note STATUS can be attached on either side of your replica. If attached on the right-hand side, change display orientation in GCS, the buttons will be reassigned too.

Tip
Note STATUS is on whenever connected to a power supply.

Technical Specifications

Supply Voltage Range	3-5 VDC
Rated Voltage	3.7 VDC
Nominal Current Consumption	280 uA
Maximum Current Consumption	45 mA (for 17 VDC)
Dimensions (Length x Width x Thickness)	47 mm x 60 mm x 54 mm
Finished Product Weight	180 g
Operating Temperature Range	min. -20° C, max. +60° C
Relative Humidity	≤ 80%

...

Version	Old Version 17	New Version Current
Changes made by	Sebastian Florek-Paszkowski (Unlicensed)	Sebastian Florek-Paszkowski (Unlicensed)
Saved on	Apr 20, 2021	Apr 23, 2021