| Table of Contents | ||||
|---|---|---|---|---|
|
...
General Information
| Info |
|---|
The information contained in this document is subject to change without notice. |
| Info |
|---|
Read carefully before use. Keep for future reference. |
| Info |
|---|
Failing to read this information may void the guarantee! |
| Info |
|---|
When using the product, always follow basic safety rules to reduce the risk of injury from fire or electrical shock. |
Safety Summary
Please read this to ensure safe and correct use. Retain this information for future reference. The information contained in this document is subject to update without notice.
...
Fire a shot, burst or pull the trigger while in SAFE mode (only if the safety lever has been removed) and do not release the trigger.
Switch the selector within 2 s. There is a single low frequency vibration.
Switch the selector in any order to change between the options indicated by vibrations:
1 low vibration – Pre-Cocking Off
2 low vibrations – Pre-Cocking Auto
3 low vibrations – Pre-Cocking Manual
Release the trigger to save the selected
Switch the selector in any order to change between the options indicated by vibrations:
1 low vibration – Pre-Cocking Off
2 low vibrations – Pre-Cocking Auto
3 low vibrations – Pre-Cocking Manual
Release the trigger to save the selected mode.
De-Cocking
Forcing the piston release after firing with Pre-Cocking enabled
Press the trigger in SEMI or BINARY mode and wait for the firing cycle to end – do not release the trigger.
After 1.5 s, a high, medium, high, medium, high, medium frequency audible message will be triggered.
Releasing the trigger after the sound message is equivalent to firing without Pre-Cocking. The piston remains in the rest position.
| Tip |
|---|
Note |
Profile Selection
Profiles are sets of particular settings of configurable TITAN functions. You can choose one of the three profiles at a time. Go to General>Profiles>Change Profile via Selector in GCS to be able to use this function. If you want to change the active profile:
...
TITAN V2 has the following optical sensors:
1 sector gear sensor
2 selector sensors
5 trigger sensors
...
Installation
Please read the installation guide below before proceeding.
...
TITAN V3 has the following optical sensors:
1 sector gear sensor
1 selector sensor
1 proximity trigger sensor
...
Installation
Please read the installation guide below before proceeding.
...
TITAN V2 NGRS has the following optical sensors:
2 gear sensors
1 selector sensor
1 trigger sensor
1 bolt catch sensor
...
Installation
Please read the Installation Guide below before proceeding.
...