Safety Summary
Please read this to ensure safe and correct use.
Failing to read this information may void the guarantee!
Safety Summary
For your safety, we recommend this product to be installed by a skilled person. If, however, you wish to proceed with TITAN installation on your own, read the safety information below carefully before installing the device.
Warning
Situations that may cause injury to yourself or others.
Caution
Situations that may cause damage to your device or other equipment.
Note
Notes, usage tips or additional information.
Warning
This device is not a toy and it may not be operated by people (including children) with limited physical or mental abilities, as well as by people with no earlier experience in operation of electronic equipment. They may use the device only under the supervision of people responsible for their safety.
Warning
Before starting the installation process, make sure that your AEG is empty and there are no BBs inside.
Warning
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the device, its parts or accessories.
Warning
Incorrectly connecting positive and negative battery terminals will cause immediate damage to the device, which is not covered by warranty, and can lead to fire.
Warning
Take caution to prevent short-circuiting the battery as the consequences may be very dangerous.
Warning
Excessive trigger sensitivity may cause unintentional discharge (firing).
Warning
When an airsoft gun is not in use, its battery must be disconnected and the hop-up chamber must be empty.
Warning
While handling an AEG with a connected battery, anyone within the range of the replica must wear personal protective equipment.
Caution
Do not remove the device protective foil or heat shrink tubes. Removing them will void the warranty.
Caution
GATE does not guarantee the compatibility of mosfets and Electronic Trigger Units (ETUs) such as TITAN with brushless motors. Connecting a brushless motor can cause immediate damage to the device, motor or battery, which is not covered by warranty.
Caution
Do not swap TITAN boards between different sets. The serial numbers of each board must match. Mixing boards can cause damage to the device, which is not covered by warranty.
Note
You ought to use an additional fuse between the battery and the device.
Note
When not in SAFE mode, avoid using the device around strong electromagnetic fields, such as PMR transmitters exceeding European standards or when electrostatic discharges, e.g. lightning, occur in the atmosphere, which may cause malfunction of the device and unintentional discharge (firing).
Caution
When operating under unusual conditions, perform maintenance outlined below for the climate similar to your area. Operating in extremely cold temperatures is not recommended. Do not expose TITAN to direct sunlight for long periods of time. Keep away from dust or sand, which can cause malfunctions and/or excessive wear. Keep TITAN out of the snow, rain, and water. This will prevent electrical failure and fluid buildup inside the gearbox.
Note
The product Warranty Form is available here: https://www.gatee.eu/warranty
Instructions
Powiązane artykuły
Filter by label
There are no items with the selected labels at this time.