The table below contains a functional comparison of settings configured via Trigger and across firmware editions. The comparison applies to the current ASTER and TITAN functionalities. You need to purchase a USB-Link or Blu-Link to connect your ASTER to the GATE Control Station App.
Function | Options configurable via trigger1 | Options configurable via GCS | ||
BASIC | ADVANCED | EXPERT | ||
Trigger sensitivity adjustment | - | + | + | + |
Fire selector modes | Safe-Semi-Auto Safe-Semi-Semi Safe-Binary-Auto Safe-Semi-Burst GCS setting* For AK47 fire selector type: Safe-Auto-Semi Safe-Auto-Binary Safe-Semi-Semi Safe-Burst-Semi GCS setting* | Safe-Semi-Auto Safe-Semi-Semi Safe-Binary-Auto Safe-Semi-Burst For AK47 fire selector type: Safe-Auto-Semi Safe-Auto-Binary Safe-Semi-Semi Safe-Burst-Semi For AUG fire selector type (2-stage trigger): 1st stage: Semi 2nd stage: Auto-Burst | 216 modes – all possible combinations of: Safe Semi Binary Burst Burst/Auto Auto For AUG fire selector type (2-stage trigger): 1st stage: Semi-Burst 2nd stage: Auto-Burst-Burst/Auto | 343 modes – all possible combinations of: Safe Semi Binary Burst Burst/Auto Auto Semi Ramping For AUG fire selector type (2-stage trigger): 1st stage: Semi-Burst 2nd stage: Auto-Burst-Burst/Auto |
Burst | 3/5 round/GCS setting* | 3/5 round | 2/3/4/5/8/10 round | 2–99 round |
Burst mode | Full/Interruptible | |||
Pre-cocking boost | GCS setting* |
|
|
|
Pre-cocking mode1 | On/Off | |||
Magazine capacity | - | Off/30 BBs | Off/30 BBs/45 BBs/115 BBs/145 BBs/185 BBs | Off/1–250 BBs |
Reload time | - | 3 s/Bolt catch3 | 0.5 s/1 s/1.5 s/2 s/2.5 s/3 s/Bolt catch3 | 0–10 s/Bolt catch3 |
Low ammo warning | - | - | Off/10 BBs | Off/1–250 BBs |
Series safety limit | - | Off/30 BBs | Off/30 BBs/60 BBs | Off/1–250 BBs |
Sniper delay | - | - | 0.2 s/0.5 s/1 s/2 s/3 s | 0.01–5 s |
ROF control | - |
|
|
|
Battery protection | Off/LiPo /LiFe | Off/LiPo/LiFe/Custom 3–17.0 V4 | ||
Low battery warning | Off/3.2 V/GCS setting* |
|
|
|
Active brake | Adaptive/Off/GCS setting* | Adaptive/0/20/40/60/80/100% | Adaptive/0/20/40/60/80/100% | Adaptive/0–100% |
Equalizer | - | - | Off/2 LVL/1 LVL | Off/2 LVL/1 LVL/Custom: 1–100%5 |
2-stage trigger | - | + | + | + |
BB counter | N/A | LAST/BB1/BB2/FACTORY | ||
Measurements | N/A | - | ROF, Trigger response, MOSFET temperature, Voltage, Current2 | ROF, Trigger response, MOSFET temperature, Voltage, Current2, RMS power2, Work2, Efficiency2, Battery drain per shot2, ROF achieved on SEMI |
Diagnostics | Vibrations/Vibrations and LED6 | + | + | + |
Cycle detection | - | On/Off | On/Off | On/Off/Custom |
Custom vibrations | - | - | - | + |
Alerts | - | + | + | + |
Profiles | N/A | - | - | + |
Setting packages | N/A | + | + | + |
Firmware update | N/A | + | + | + |
Firmware upgrade | N/A | N/A | One-time payment | One-time payment |
1 N/A for AUG fire selector type
2 N/A for ASTER
3 Available only for TITAN V2 NGRS
4 For ASTER: 3–12.75 V
5 N/A for TITAN V2
6 Available only for ASTER
7 For ASTER: Upgrade needed
Information in the table may be subject to change.
This needs to be predefined in the GCS and is then available at trigger level. Once you exit configuration via trigger, the setting cannot be changed and needs to be reintroduced in GCS.
The Aster is sold as BASIC only. For ADVANCED and EXPERT purchase an upgrade.
Firmware edition | BASIC | ADVANCED | EXPERT | |
|---|---|---|---|---|
TITAN | Application | Up to extremely tuned | ||
Box version | Module | Upgrade your BASIC Module or get the Advanced Set straight away. | Upgrade your BASIC or ADVANCED Module or get the Expert Blu-Set straight away. | |
ASTER | Application | Up to mid-tuned | Up to high-tuned | |
Box version | Module | Upgrade your BASIC Module. | Upgrade your BASIC or ADVANCED Module. | |
Add Comment