Read carefully before use. Keep for future reference.

The information contained in this document is subject to change without notice for specification changes or other reasons. When using a product listed here be sure to obtain the latest specifications. Please read the QuickStart Guide (QSG) [STA] first.

Connecting STATUS, GCS & ETU

Please pair STATUS with the GATE Control Station App as well as connect your Electronic Trigger Unit in order to enjoy all the available functionalities, you can download GCS here: https://www.gatee.eu/gcs

1. Have the STATUS PIN card and Blu-Link PIN card handy

2. Make sure STATUS battery is charged

3. Connect Blu-Link and ETU

4. Connect the battery and Blu-Link

5. Enable Bluetooth® on your mobile device

6. Log into GCS

7. Tap + in the Dashboard

8. Enable the required permissions on your device (in order to search for available STATUS and Blu-Link devices within Bluetooth® range); scanning for Bluetooth® devices starts automatically

9. Select the Blu-Link you want to connect to from the list of available devices; if your device is not found, pull to refresh or tap Refresh Scan

10. Enter the PIN number

11. Update Blu-Link Firmware:

Tap the connected Blu-Link

Go to This Device

Go to Firmware Version

Installation starts, wait until complete

12. Connect your ETU

13. Update your ETU to STATUS Ready Firmware:
Tap the connected ETU (TITAN V2 in the example below)

Go to This Device

Go to Firmware Version

Choose STATUS Ready and version

Tap Update

Update starts, wait until complete

14. Tap + on the Dashboard

15. Choose the STATUS you want to connect to from the list of the available devices; if the device is not found, pull to refresh or tap Refresh Scan

16. Enter PIN

Once complete, you’re taken back to Dashboard, pair STATUS and Blu-Link

17. Enjoy using STATUS

Navigation

You can perform basic configuration navigating the STATUS Menu using the two rear buttons referred to as [UP] and [DOWN] for left-hand side orientation. The buttons are reassigned automatically for other orientations set in the STATUS Main Menu, for top and bottom orientations, the buttons become LEFT and RIGHT respectively. Below you will find a description of STATUS Dashboards and Menus in default settings, i.e. left-hand side orientation.

PRESS & HOLD 3 s [UP+DOWN]: turn STATUS on

PRESS UP: go up, previous Dashboard

PRESS [DOWN]: go down, next Dashboard

PRESS [UP+DOWN]: enter, accept, accept & exit, confirm, go to the QUICK ACCESS Menu from any Dashboard, unlock screen

PRESS & HOLD 8 s [UP+DOWN]: hard reset

PRESS & HOLD 2 s [UP+DOWN]: on any Back option: go to the last Dashboard used

Dashboards

Once you turn STATUS on, you’re taken to the last Dashboard you displayed.

Dashboard 1

The top bar indicates:

• active Bluetooth®

• Bluetooth® connection with

  • GCS (G)

  • Blu-Link (B)

  • GATE ETU (flashing E), TITAN (T), ASTER (A) or (H) HPA

• the Hop-up assistant – a visual indicator of the replica angle

• remaining STATUS Battery Life as a percentage

The MAIN WIDGET includes:

• the widget icon indicating either the remaining BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• the 4-Digit Counter indicating the number of BBs left; if there are 10000 or more BBs left, the counter displays 9999; whenever STATUS is updating data from Blu-Link, you will see: - - - - (in the case of HPA instead of - - - - you will see the value set in Rem BBs/Mag)

The other WIDGETS include a choice of up to four items from the list below, arranged in two rows, one under the other:

All BBs Fired – the number of BBs fired since turning STATUS on

If you press [DOWN] within this Dashboard, you go to:

Dashboard 2

The top bar indicates, as previously:

• active Bluetooth®

• Bluetooth® connection with

  • GCS (G)

  • Blu-Link (B)

  • GATE ETU (flashing E), TITAN (T), ASTER (A) or (H) HPA

• the Hop-up assistant – a visual indicator of the replica angle

• remaining STATUS Battery Life as a percentage

The MAIN WIDGET includes:

• the widget icon indicating either the remaining BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• 4-Digit Counter indicating the number of BBs left; if there are 10000 or more BBs left, the counter displays 9999; the font size adjusts dynamically to display either 4 or 3 digits; whenever STATUS is updating data from Blu-Link, you will see: - - - - 
  (in the case of HPA instead of - - - you will see the value set in Rem BBs/Mag)

The other WIDGETS include a choice of up to two items from the list below, arranged one under the other:

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining BBs you can fire using the replica battery (this option is not available for HPA)

• Rem BBs/Mag – remaining BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calories Burnt – the number of calories you’ve burnt

• All BBs Fired – the number of BBs fired since turning STATUS on

If you press [DOWN] within this Dashboard, you go to:

Dashboard 3

The MAIN WIDGET includes:

• the widget icon indicating either the remaining BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• 4-Digit Counter indicating the number of BBs left; if there are 10000 or more BBs left, the counter displays 9999; the font size adjusts dynamically to display either 4 or 3 digits; whenever STATUS is updating data from Blu-Link, you will see: - -
  (in the case of HPA instead of - - you will see the value set in Rem BBs/Mag)

The other WIDGETS include a choice of up to two items from the list below, arranged in a single row:

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining BBs you can fire using the replica battery (this option is not available for HPA)

• Rem BBs/Mag – remaining BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calories Burnt – the number of calories you’ve burnt

• All BBs Fired – the number of BBs fired since turning STATUS on

If you press [DOWN] within this Dashboard, you go to:

Dashboard 4

The MAIN WIDGET includes:

• the widget icon indicating either the remaining BBs you can fire using the replica battery (in the Menu indicated as Rem BBs/Batt – this option is not available for HPA) or the remaining BBs left in the magazine (Rem BBs/Mag)

• the status bar visually indicating the number of BBs left

• 4-Digit Counter indicating the number of BBs left; if there are 10000 or more BBs left, the counter displays 9999; the font size adjusts dynamically to display either 4 or 3 digits; whenever STATUS is updating data from Blu-Link, you will see: -
  (in the case of HPA instead of - you will see the value set in Rem BBs/Mag)

If you press [DOWN] within this Dashboard, you go back to Dashboard 1.

QUICK ACCESS Menu

PRESS [UP+DOWN] to go to the QUICK ACCESS Menu from any Dashboard

PRESS [UP] to go up

PRESS [DOWN] to go down

All items with an arrow pointing right > (e.g. QUICK ACCESS > Main Menu > System > Temp Unit > ‘C, 'F, Back) are Submenus that can be accessed further and reveal more items to choose from.

QUICK ACCESS

Bolt Catch RST – reset the number of BBs

Rem Mag RST – reset the number of magazines

Mag Cap – magazine capacity, which you can set to 30, 80, 130 or a custom number of BBs; to set the custom number, PRESS [UP+DOWN] and then PRESS [UP+DOWN] again to set each of the four digits, using either button to change the values and move between the digits, finally go to Set and PRESS [UP+DOWN] to confirm

Mag Number – the number of magazines, which you can set to 0-9 or a custom number of magazines; to set the custom number, PRESS [UP+DOWN] and then PRESS [UP+DOWN] again to set each of the four digits, using either button to change the values and move between the digits, finally go to Set and PRESS [UP+DOWN] to confirm

Distance RST – reset the distance you’ve traveled

Main Menu – more settings and options

Shutdown – turn STATUS off

Cancel – go back to the last displayed Dashboard

MAIN MENU

Dashboards – configure what is shown/hidden in each of the four Dashboards

Display – configure Brightness and Orientation

System – configure if you go back to the last Dashboard used after firing a shot or a period of idleness, distance unit and stride length, STATUS temperature unit, Bluetooth® pairing and unpairing options, locking buttons as well as Factory Reset

About – check the Firmware Version, Serial Number, PCB Number, find QR codes for Contact details and License information

Cancel – go back to the last displayed Dashboard

DASHBOARDS

DASHBOARD 1 – Dashboard 1 configuration

DASHBOARD 2 – Dashboard 2 configuration

DASHBOARD 3 – Dashboard 3 configuration

DASHBOARD 4 – Dashboard 4 configuration

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 1

MAIN WIDGET – configure the Main Widget to indicate either the remaining BBs you can fire using the replica battery (Rem BBs/Batt) or the remaining BBs left in the magazine (Rem BBs/Mag)

TL WIDGET – configure the Top Left Widget; the example below shows the remaining BBs left in the magazine:

TR WIDGET – configure the Top Right Widget; the example below shows the distance traveled:

BL WIDGET – configure the Bottom Left Widget; the example below shows STATUS temperature:

BR WIDGET – configure the Top Left Widget; the example below shows the number of magazines you’ve got except for the one in the replica:

You can configure any of the above widgets to indicate one of these items:

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining BBs you can fire using the replica battery

• Rem BBs/Mag – remaining BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calorie Count – the number of calories you’ve burnt

or you can Hide the widget

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 2

MAIN WIDGET – configure the Main Widget to indicate either the remaining BBs you can fire using the replica battery (Rem BBs/Batt) or the remaining BBs left in the magazine (Rem BBs/Mag)

T WIDGET – configure the Top Widget

B WIDGET – configure the Bottom Widget

You can configure any of the above widgets to indicate one of these items:

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining BBs you can fire using the replica battery

• Rem BBs/Mag – remaining BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calorie Count – the number of calories you’ve burnt

or Hide the widget

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 3

MAIN WIDGET – configure the Main Widget to indicate the remaining BBs you can fire using the replica battery (Rem BBs/Batt) or the remaining BBs left in the magazine (Rem BBs/Mag)

L WIDGET – configure the Left Widget

R WIDGET – configure the Right Widget

to indicate one of these items:

• AEG Batt Lvl – remaining replica battery life as a percentage

• Rem BBs/Batt – the remaining BBs you can fire using the replica battery

• Rem BBs/Mag – remaining BBs left in the magazine

• Rem Mags – the number of magazines you’ve got except for the one in the replica

• Temperature – STATUS temperature

• Distance – how far you’ve traveled

• Calorie Count – the number of calories you’ve burnt

or Hide the widget

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

DASHBOARD 4

MAIN WIDGET – configure the Main Widget to indicate either the remaining BBs you can fire using the replica battery (Rem BBs/Batt) or the remaining BBs left in the magazine (Rem BBs/Mag)

VISIBILITY – shows or hides the Dashboard

Back – go back to the previous Menu; if you PRESS & HOLD 2 s [UP+DOWN] on any Back option, you go to the last Dashboard used

Selector Positions

When you switch the selector on your replica this is reflected in STATUS for a few seconds.

Screen Lock

You can set automatic screen lock after 5, 10, 15 or 30 s of idleness. You will be informed about a locked screen with a relevant message. PRESS [UP+DOWN] on a locked screen to unlock it.

Update Mode

Whenever you PRESS & HOLD 8 s [UP+DOWN] or launch an update in the GATE Control Station, the splash screen is displayed informing you about Update Mode, showing the serial number of your STATUS and bootloader version. Press any button to continue unless you are performing an update via the GCS App.

Complete STATUS Menu