Improved:
- trigger sensor functionality
- selector mode configuration in Programming via Trigger changed from SAFE-BINARY-SEMI to SAFE-SEMI-BINARY
- Programming via Trigger card available in https://help.gatee.eu/

Added:
- brushless motor support
- brushless motor configuration without connecting to GCS
- trigger sensitivity regulation without connecting to GCS
- Pre-cocking Boost configuration without connecting to GCS
- full access to Telemetry data previously available only with EXPERT firmware
- service mode that allows you to check the operation of the gear sensor during installation without using GCS
- Magazine Capacity: 115 BBs
- Reload time: 0.5 s
- Low ammo warning: 10 BBs
- Sniper delay: 0.2 s/0.5 s
- Cycle detection: Manual

Improved:
- trigger sensor functionality
- selector mode configuration in Programming via Trigger changed from SAFE-BINARY-SEMI to SAFE-SEMI-BINARY
- Programming via Trigger card available in https://help.gatee.eu/

Added:
- brushless motor support
- brushless motor configuration without connecting to GCS
- trigger sensitivity regulation without connecting to GCS
- Pre-cocking Boost configuration without connecting to GCS
- full access to Telemetry data previously available only with EXPERT firmware
- service mode that allows you to check the operation of the gear sensor during installation without using GCS
- Low ammo warning: 20 BBs
- ROF Control: Adaptive: 1/2/3/...100 RPS
- Cycle detection: Manual

Improved:
- trigger sensor functionality
- selector mode configuration in Programming via Trigger changed from SAFE-BINARY-SEMI to SAFE-SEMI-BINARY
- Programming via Trigger card available in https://help.gatee.eu/

Added:
- brushless motor support
- brushless motor mode available without connecting to GCS
- trigger sensitivity adjustment without connecting to GCS
- Pre-cocking Boost configuration without connecting to GCS
- service mode that allows you to check the operation of the gear sensor during installation without using GCS

Added:
- communication with STATUS
Removed:
- Programming via Trigger
Improved:
- sending selector state to STATUS

Improved:
- 2-stage trigger operation for Quantum Trigger
- Fire selector operation at high ambient temperatures
Fixed:
- Elimination of a shot while switching from SAFE to SEMI when Quantum Trigger is pressed

Improved:
- DTC error tracking if the trigger and/or selector
- gear sensor support for GCS
- other improvements

Fixed:
- First shot failure after switching fire selector from SAFE

Added:
- Green LED blinks after connecting the battery if self test was passed successfully

Improved:
- Operation of the trigger
- Detecting of 2-cell battery
- Removing of blockade after trigger sensor was overexposed
- First shot failure after switching fire selector from SAFE
- 2-stage trigger operation for Quantum Trigger
- Fire selector operation at high ambient temperatures
- DTC error tracking if the trigger and/or selector
- Gear sensor support for GCS

Other improvements
Fixed:
- Elimination of a shot while switching from SAFE to SEMI when Quantum Trigger is pressed
Added:
- Support for BLDC motors
- Support for GATE Quantum Trigger™
- Green LED blinks after connecting the battery if self test was passed successfully

Improved:
- Calibration of device without using GCS
- Various improvements enhancing operation of the device