Congratulations on your new USB-Link!
It allows you to easily update the firmware and adjust the settings of a compatible AEG Controller, using the GATE Control Station app.
With the GCS app, you can control your airsoft gun from smartphone or tablet with Android and PC with Windows or macOS.
See also the full manual at: www.gatee.eu/manuals
Safety Summary
For your safety, read the safety information below carefully before installing the device.
Warning
Situations that may cause injury to yourself or others.
Caution
Situations that may cause damage to your device or other equipment.
Notice
Notes, usage tips or additional information.
Caution
Prevent the USB-Link and the ends of USB cable from contact with conductive materials, such as dust, liquid or metal powder.
Notice
Do not remove the device protective foil.
Notice
The product Warranty Form is available on our website: www.gatee.eu/warranty
Notice
In case you have any difficulties while installing or using this product:
a) email us at support@gatee.eu
b) contact us via Facebook:
https://www.facebook.com/gatee/
c) call (+48) 122-100-523
How to use USB-Link
Download and install GATE Control Station:
www.gatee.eu/gcs
Connect the USB-Link to PC, Mac or smartphone using one of the dedicated USB cables:
PC/Mac
USB-A cable for USB-Link
Smartphones
Micro-USB cable for USB-Link USB-C cable for USB-Link
Notice
Micro-USB cable has the same connectors on both sides. However, it is very important to connect the USB-Link and smartphone to appropriate ends of the cable. Otherwise, it will not work.
Notice
If in case of PC, you cannot see your USB-Link on the list or it is accompanied by exclamation mark, you must install appropriate driver manually. You can download the driver here: www.gatee.eu/drivers
4. Read USB-Link manual and get familiar with the functions:
www.gatee.eu/MANUALS ???
5. Connect a compatible device with deans-T connector to the USB-Link.
TROUBLESHOOTING
USB-Link has a 4-color LED indicator.
BLUE (glowing) – the USB-Link is connected to PC, Mac or smartphone. AEG Controller is not connected or PC/Mac driver is not installed. You can download the driver here: www.gatee.eu/drivers
BLUE (blinking) – the USB-Link does not have firmware installed. Please install the USB-Link firmware via GCS.
GREEN (glowing) – the USB-Link is connected to PC, Mac or smartphone and AEG Controller
GREEN (blinking) – the USB-Link is connected to PC, Mac or smartphone and AEG Controller, but the Controller does not have firmware installed. Please install its firmware via GCS.
YELLOW (glowing) – the USB-Link is transmitting data.
RED (glowing) – communication with AEG Controller was interrupted while saving settings, which may have been transmitted incorrectly. Please check the connection between the USB-Link and AEG Controller.
Compatible with
TITAN V2
TITAN V3
TITAN V2 NGRS
TITAN Tactical Programming Card
ASTER V2
Stay tuned with GATE
facebook.com/Gatee
youtube.com/GateMovies
twitter.com/GateEnterprise
instagram.com/GateEnterprise
Manufactured by
GATE Enterprise Sp. z o.o. Sp. k.
Torowa 3H
PL-30435 KRAKÓW
Email: office@gatee.eu
Tel: (+48) 122-100-523
www.gatee.eu
Product disposal instructions
The symbol shown here means that the product is classified as Electrical or Electronic Equipment and should not be disposed with other household and commercial waste at the end of its working life. The Waste of Electrical and Electronic Equipment (WEEE Directive 2012/19/UE) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment. Purchasers shall take any old electrical equipment to waste recycling public centers or points of sale.
CERTIFICATE OF CONFORMITY
GATE ENTERPRISE sp. z o.o. sp. k. hereby declares under our sole responsibility that GATE USB-Link is in conformity with the essential requirements of the following Directives: EC DIRECTIVE 2011/65/EU. The product is certified as RoHS Compliant.
Add Comment