/
Installation Guide (InstaG) [TTN]

Installation Guide (InstaG) [TTN]

Owned by Sebastian Florek-Paszkowski (Unlicensed), created
Last updated: Apr 28, 2021
8 min read

Initial Use

  1. After unboxing and before installation, connect TITAN to the GCS App via Blu-Link or USB-Link. You can download GCS here: https://www.gatee.eu/gcs

     


    The GCS Information for Use is here: GCS

     

     

  2. Check for latest firmware updates.

Note 
You need a USB-Link or a Blu-Link to connect your TITAN to GCS for Android and Windows/macOS. To connect to the iOS GCS, you must use a Blu-Link.

Note
If you are using USB-Link, your Android (version 5.0 or higher) device must support OTG technology to run GCS.

Note
If you are using Blu-Link, Bluetooth 4.0 or higher is required.

3. Now you’re ready to install TITAN in the gearbox.

Installation

TITAN V2

 

TITAN V3

TITAN V2 NGRS

 

Quick Access Menu

You can access Pre-cocking or Profiles using a shortcut. After firing a shot, burst or while in SAFE (only if the safety lever has been removed)*, hold the Trigger and switch the Selector within the specified time (see table). Switch the Selector in any order to change between the options indicated by motor vibrations. 

By releasing the Trigger, you exit the function confirming it. Bear in mind that Programming via Trigger is a different process. To find out more check the PROGRAMMING VIA TRIGGER CARD included or go to https://gatee.eu/technical-support/manuals.

*You can enter Programming via Trigger only when the Selector on the replica is in SEMI position and AUTO mode is not assigned to this position.

 

Function

available if preset in GCS

in SEMI or BURST mode preset in GCS in SEMI physical position only

Pre-cocking

Profiles (EXPERT only)

Programming via Trigger

To enter the function: hold the Trigger 

and switch the Selector within 2 s

and switch the Selector within 2–7 s

for > 7 s 

Available options

Option

Low frequency vibration

Option

High frequency vibration

check the PROGRAMMING VIA TRIGGER CARD included or go to https://gatee.eu/technical-support/manuals

Off

1

Profile 1

1

Auto

2

Profile 2

2

Manual*

3

Profile 3

3

*If defined in GCS

Pre-cocking Selection

In GCS go to Trigger>Pre-cocking>Switch mode via Selector and use the toggle button to activate this function.

  1. Fire a shot, burst or pull the Trigger while in SAFE mode (only if the safety lever has been removed) and do not release the Trigger.

  2. Switch the Selector within 2 s. There is a single low frequency vibration.

  3. Switch the Selector in any order to change between options, which are indicated by vibrations:

    1. 1 low vibration – Pre-cocking Off

    2. 2 low vibrations – Pre-cocking Auto

    3. 3 low vibrations – Pre-cocking Manual

  4. Release the Trigger to save the selected mode.

Profile Selection

Profiles are sets of particular settings of configurable TITAN functions. You can choose one of the three profiles at a time. Go to General>Profiles>Change profile change via Selector in GCS to be able to use this function. If you want to change the active Profile:

  1. Fire a shot, burst or pull the Trigger while in SAFE (only if the safety lever has been removed) and do not release the Trigger.

  2. Switch the Selector within 2–7 s. There is a single high frequency vibration.

  3. Switch the Selector in any order to change between options, which are indicated by vibrations. 

    1. 1 high vibration – Profile 1

    2. 2 high vibrations – Profile 2

    3. 3 high vibrations – Profile 3

  4. Release the Trigger to save the selected profile.

Continue:
TITAN V2 EXPERT – User Manual

Go back to:
https://gateee.atlassian.net/wiki/spaces/RD/pages/428867636
Safety & Regulatory Information [TTN]archived