Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 3 Next »

Congratulations on your new USB-Link!

It allows you to easily update the firmware and adjust the settings of a compatible GATE device (edit: AEG Controller) using the GATE Control Station app.

With the GCS app, you can control your airsoft gun from smartphone or tablet with Android and PC with Windows or macOS.

See also the full user guide at: www.gatee.eu/manuals (nie ma takowego i chyba nie ma potrzeby - zdanie do wyrzucenia)

Safety Summary

For your safety, read the safety information below carefully before installing the device.

Warning
Situations that may cause injury to yourself or others.

Caution
Situations that may cause damage to your device or other equipment.

Notice
Notes, usage tips or additional information.

Caution
Prevent the USB-Link and the small end of cable from contact with conductive materials (e.g., dust, liquid or metal powder).

Notice
Do not remove the device protective foil.

Notice
The product Warranty Form is available on our website:
www.gatee.eu/warranty

Notice
In case you have any difficulties while installing or using this product:
a) email us at support@gatee.eu
b) contact us via Facebook:
https://www.facebook.com/gatee/
c) call (+48) 122-100-523

HOW TO USE USB-LINK? (To przedstawialiśmy graficznie na pudełku, więc pewnie nie ma sensu powtarzać w QS)

  1. Download and install the GATE Control Station:
    www.gatee.eu/GCS

  2. Connect the USB-Link to PC or smartphone using USB cable. The dedicated cables:

    PC:
    USB-A cable for USB-Link

    Smartphones:
    Micro-USB cable for USB-Link
    USB-C cable for USB-Link

Notice
Micro-USB cable has the same connectors on both sides. However, it is very important to connect the USB-Link and smartphone to appropriate ends of the cable. Otherwise, it will not work.

3. If in case of PC, you cannot see your device on the list or it is accompanied by exclamation mark, it means that you must install the device’s driver manually. You can download the driver here:
www.ftdichip.com/Drivers/VCP.htm

4. Read the device’s manual and get familiar with the functions:
www.gatee.eu/MANUALS

5. Connect a compatible device with
deans-t connector to the USB-Link.

TROUBLESHOOTING (To będzie na karcie, więc nie kopiuję)

Compatible with

TITAN V2
TITAN V3
TITAN V2 NGRS
TITAN Tactical Programming Card
ASTER V2

Stay tuned with GATE

facebook.com/Gatee
youtube.com/GateMovies
twitter.com/GateEnterprise
instagram.com/GateEnterprise

Manufactured by

GATE Enterprise Sp. z o.o. Sp. k.
Torowa 3H
PL-30435 KRAKÓW
Email: office@gatee.eu
Tel: (+48) 122-100-523
www.gatee.eu

Product disposal instructions
The symbol shown here means that the product is classified as Electrical or Electronic Equipment and should not be disposed with other household and commercial waste at the end of its working life. The Waste of Electrical and Electronic Equipment (WEEE Directive 2012/19/UE) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment. Purchasers shall take any old electrical equipment to waste recycling public centers or points of sale.

CERTIFICATE OF CONFORMITY
GATE ENTERPRISE sp. z o.o. sp. k. hereby declares under our sole responsibility that the products GATE ASTER V2 and GATE USB-Link are in conformity with the essential requirements of the following Directives: EC DIRECTIVE 2011/65/EU. The products are certified as RoHS Compliant.

  • No labels